Table of Contents
Advertisement
The lamp may automatically
deactivate at a temperature
below 140 °F during some
oven functions.
6.3 Setting the oven function
1. Activate the appliance with
The display shows the set temperature,
the symbol and the number of the oven
function.
2. Touch
or
function.
3. Touch
or the appliance starts
automatically after five seconds.
If you activate the appliance
and do not set an oven
function or programme, the
appliance deactivates
automatically after 20
seconds.
6.4 Changing the temperature
Touch
or
to change the
temperature in steps of 41 °F.
When the appliance is at the set
temperature, an acoustic signal sounds
three times and the Heat up indicator
goes out.
6.5 Checking the temperature
You can see the temperature in the
appliance when the function or
programme operates.
1. Touch
.
The Temperature / Time display shows
the temperature in the appliance.
2. Touch
to go back to the set
temperature or the display shows it
automatically after five seconds.
6.6 Fast heat up function
Do not put food in the oven
when the Fast heat up
function operates.
The Fast heat up function is not available
with every oven function. An acoustic
signal sounds if the Fast heat up function
or
.
to set an oven
is not available for the set function if
Faulty tone is activated in the settings
menu. Refer to "Using the settings
menu".
The Fast heat up function decreases the
heat up time.
To activate the Fast heat up function
touch and hold
seconds.
If you activate the Fast heat up function,
the bars on the display
one and
comes on to show that
the function operates.
6.7 Steam cooking
The water drawer cover is in the control
panel.
WARNING!
Use only water as the liquid.
Do not use filtered
(demineralised) or distilled
water.
1. Press the cover of the water drawer
to open it.
2. Fill the water drawer with cold water
to the maximum level (around 950
ml) until the acoustic signal sounds or
the display shows the message.
The water supply is sufficient for
approximately 50 minutes.
Do not fill the water drawer over its
maximum capacity. There is a risk of
water leakage, overflow and furniture
damages.
3. Push the water drawer to its initial
position.
4. Activate the appliance.
5. Set the steam function (refer to the
"Oven functions" table) and the
temperature.
6. If necessary, touch
DURATION
or END
(refer to "Setting the END" or
"Setting the DURATION").
The first steam shows after
approximately 2 minutes. An acoustic
signal sounds when the appliance is at
approximately the set temperature. The
signal sounds again at the end of the
cooking time.
ENGLISH
13
for more than three
flash one by
to set the
function
Advertisement
Table of Contents
