Advertisement
Quick Links
D8T Box Camera
User Manual
User Manual
Thank you for purchasing our product. If there are any
questions, or requests, do not hesitate to contact the
dealer.
This manual applies to the models below:
Model
DS-2CC12D8T-AMM
This manual may contain technical incorrect places or
printing errors, and the content is subject to change
without notice. The updates will be added to the new
version of this manual. We will readily improve or
update the products or procedures described in the
manual.
.
0100001070801
Advertisement
Related Manuals for HIKVISION DS-2CC12D8T-AMM
Summary of Contents for HIKVISION DS-2CC12D8T-AMM
- Page 1 This manual applies to the models below: Model DS-2CC12D8T-AMM This manual may contain technical incorrect places or printing errors, and the content is subject to change without notice. The updates will be added to the new version of this manual.
- Page 2 Regulatory Information FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules.
- Page 3 Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions”. Warnings: Serious injury or death may occur if any of the warnings are neglected.
- Page 4 Keep the camera away from liquid while in use for non-water-proof device. While in delivery, the camera shall be packed in its original packing, or packing of the same texture. Mark Description Table 0-1 Mark Description Mark Description DC Voltage AC Voltage...
- Page 5 1 Introduction 1.1 Product Features The camera is applicable for indoor conditions. The main features are as follows: High performance CMOS sensor Low illumination: 0.005 Lux @ (F1.2, AGC ON) Auto gain control 120 dB true WDR ...
-
Page 6: Installation Preparation
2 Installation 2.1 Installation Preparation Before you start: Make sure that the device in the package is in good condition and all the assembly parts are included. Make sure that all the related equipment is power-off during the installation. ... -
Page 7: Menu Description
3 Menu Description Purpose: Call the menu by clicking icon on the PTZ Control interface, or call preset No.95. Steps: 1. Connect the camera with the TVI DVR, and the monitor, shown as the figure 3-1. Figure 3-1 Connection 1. Power on the analog camera, TVI DVR, and the monitor to view the image on the monitor. - Page 8 3.1 FORMAT PAL (Phase Alternating Lines) PAL is a color encoding system for analog television used in broadcast television systems in most countries. NTSC: (National Television System Committee) NTSC is the analog television system that is used in most of North America, parts of South America, Myanmar, South Korea, etc.
- Page 9 BLC (Backlight Compensation) BLC (Backlight Compensation) compensates light to the object in the front to make it clear, but this may cause the over-exposure of the background where the light is strong. When BLC is selected as the exposure mode, the BLC level can be adjusted from 0 to 8.
-
Page 10: Video Setting
DAY NIGHT AUTO MODE RETURN Figure 3-5 DAY NIGHT COLOR The image is colorized in day mode all the time. The image is black and white all the time. AUTO Automatically switch Color or BW (Black and White) according to actual scene brightness. 3.3.4 VIDEO SETTING Move the cursor to VIDEO SETTING and click Iris+ to enter the submenu. - Page 11 H: The image flips 180° horizontally. V: The image flips 180° vertically. HV: The image flips 180° both horizontally and vertically. 3.3.5 FUNC (Functions) In the FUNC sub-menu, you can set the privacy mask, the motion detection, camera ID, and DPC of the camera.
- Page 12 CAM ID SETTING MODE CAM ID X POSITION 75 Y POSITION RETURN Figure 3-9 CAM ID SETTING Set the MODE as ON. Click up/don left/right button to choose the camera ID and the position. DPC (Defective Pixel Correction) Defective pixels are pixels in a CMOS image sensor fail to sense light levels correctly.