HIKVISION DS-2CC12D5S-IT3 User Manual
  1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. DS-2CC12D5S-IT3
  6. User manual

HIKVISION DS-2CC12D5S-IT3 User Manual

Hd-sdi ir bullet camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

'
Camera
HD-SDI IR Bullet Camera
User Manual
UD.6L0201D1196A01
0

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-2CC12D5S-IT3

Summary of Contents for HIKVISION DS-2CC12D5S-IT3

  • Page 1 ‘ Camera HD-SDI IR Bullet Camera User Manual UD.6L0201D1196A01...
  • Page 2 HD-SDI IR Bullet Camera·User Manual Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. This manual applies to DS-2CC12D5S-IT3, DS-2CC12D5S-IT5, and DS-2CC12D5S-IR. This manual may contain several technical incorrect places or printing errors, and the content is subject to change without notice.

  • Page 3: Regulatory Information

    HD-SDI IR Bullet Camera·User Manual Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.

  • Page 4: Safety Instruction

    HD-SDI IR Bullet Camera·User Manual 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.
  • Page 5 HD-SDI IR Bullet Camera·User Manual Warnings Follow these Cautions Follow these safeguards to prevent precautions to prevent serious injury or death. potential injury or material damage. Warnings  In the use of the product, you must be in strict compliance with the electrical safety regulations of the nation and region.
  • Page 6 HD-SDI IR Bullet Camera·User Manual  If smoke, odor or noise rise from the device, turn off the power at once and unplug the power cable, and then please contact the service center.  If the product does not work properly, please contact your dealer or the nearest service center.
  • Page 7 HD-SDI IR Bullet Camera·User Manual  To avoid heat accumulation, good ventilation is required for operating environment.  Keep the camera away from liquid while in use.  While in delivery, the camera shall be packed in its original packing, or packing of the same texture. ...

  • Page 8: Table Of Contents

    HD-SDI IR Bullet Camera·User Manual Table of Contents 1 Introduction ..................9 1.1 Product Features ............. 9 1.2 Overview ............... 10 1.2.1 Overview of Type I HD-SDI Bullet Camera ... 10 1.2.2 Overview of Type II HD-SDI Bullet Camera ..11 1.2.3 Overview of the Type III HD-SDI Bullet Camera...
  • Page 9 HD-SDI IR Bullet Camera·User Manual 3.8.4 Privacy ..............38 3.8.5 Language ............40 3.8.6 Defect ..............40 3.8.7 Version ............... 43 3.9 ADJUST ................43 3.9.1 Sharpness ............44 3.9.2 Monitor .............. 44 3.9.3 LSC ..............45 3.9.4 Video. Out ............45 3.10 RESET ................

  • Page 10: Introduction

    HD-SDI IR Bullet Camera·User Manual 1 Introduction 1.1 Product Features This series of camera adopts high-sensitive sensor and advanced circuit board design technology. It features high resolution, low distortion, and low noise features, etc., which make it extremely suitable for surveillance system and image process system. The main features of HD-SDI IR Bullet cameras are as follows: ...

  • Page 11: Overview

    HD-SDI IR Bullet Camera·User Manual 1.2 Overview 1.2.1 Overview of Type I HD-SDI Bullet Camera Figure 1-1 Overview of Type I HD-SDI IR Bullet Camera Table 1-1 Description Description Description Sun Shield Power Cable Lens HD-SDI Cable IR LED CVBS Cable Adjustable Screw...

  • Page 12: Overview Of Type Ii Hd-Sdi Bullet Camera

    HD-SDI IR Bullet Camera·User Manual 1.2.2 Overview of Type II HD-SDI Bullet Camera Figure 1-2 Overview of Type II HD-SDI IR Bullet Camera Table 1-2 Description Description Description Sun Shield Power Cable Lens HD-SDI Cable IR LED CVBS Cable Adjustable Screw...

  • Page 13: Overview Of The Type Iii Hd-Sdi Bullet Camera

    HD-SDI IR Bullet Camera·User Manual 1.2.3 Overview of the Type III HD-SDI Bullet Camera Figure 1-3 Overview of Type III HD-SDI IR Bullet Camera Table 1-3 Description Description Description Mounting Base IR LED Adjustable Nut HD-SDI Cable Sun Shield Power Cable Lens CVBS Cable...

  • Page 14: Installation

    HD-SDI IR Bullet Camera·User Manual 2 Installation Before you start:  Please make sure that the device in the package is in good condition and all the assembly parts are included.  Make sure that all the related equipment is power-off during the installation.
  • Page 15 HD-SDI IR Bullet Camera·User Manual  Both wall mounting and ceiling mounting are suitable for type I and type II HD-SDI IR bullet camera. Wall mounting will be taken as an example in the section. And you can take steps of wall mounting as a reference if ceiling mounting is adopted.
  • Page 16 HD-SDI IR Bullet Camera·User Manual Figure 2-2 Secure the Camera to the Wall 4. Connect the corresponding power/HD-SDI/CVBS cables. 5. Adjust the Lens. 1). Loosen screw 1 to adjust the pan direction [0°~360°]. Tighten the screw after completing the adjustment. 2).

  • Page 17: Installation Of Type Iii Hd-Sdi Ir Bullet Camera

    HD-SDI IR Bullet Camera·User Manual Figure 2-3 3-axis Adjustment 2.2 Installation of Type III HD-SDI IR Bullet Camera Both wall mounting and ceiling mounting are suitable for type III HD-SDI IR bullet camera. Ceiling mounting will be taken as an example in the section.
  • Page 18 HD-SDI IR Bullet Camera·User Manual Figure 2-4 Drill Template Route the corresponding cables. Secure the camera to the ceiling with the supplied PA4 Screws. Figure 2-5 Secure the Camera to the Ceiling...
  • Page 19 HD-SDI IR Bullet Camera·User Manual Connect the corresponding power/HD-SDI/CVBS cables. Adjust the Lens. Loosen the adjustable nut. Adjust the pan direction [0°~360°]. Adjust the tilt direction [0°~90°]. Rotate the camera [0~360°] to adjust the lens to the surveillance angle. Tighten the adjustable nut to complete the installation. Figure 2-6 3-axis Adjustment...

  • Page 20: Menu Description

    HD-SDI IR Bullet Camera·User Manual 3 Menu Description Setup ADJUST SPECIAL RESET SCENE LENS EXPOSURE BACKLIGHT DAY&NIGHT EXIT MANUAL SHUTTER COLOR 2D NR INDOOR SHARPNESS TITLE OUTDOOR HSBLC AWC-SET 3D NR D-EFFECT MONITOR INDOOR1 SENS-UP INDOOR MOTION VIDEO. LOW- BRIGHTNE OUTDOOR PRIVACY LIGHT...

  • Page 21: Lens

    HD-SDI IR Bullet Camera·User Manual 3.2 LENS The camera is equipped with a fixed lens, which is not configurable. 3.3 EXPOSURE EXPOSURE 1. SHUTTER AUTO 2. AGC 3. SENS-UP 4. BRIGHTNESS ---|------ 40 5. DEFOG 6. BACKLIGHT 7. RETURN Figure 3-2 Exposure Exposure describes the brightness-related parameters.

  • Page 22: Agc

    HD-SDI IR Bullet Camera·User Manual If you select shutter as AUTO or 1/25, the SENS-UP is adjustable (OFF/AUTO), and the SENS-UP is disabled if any other shutter speed is selected. 3.3.2 AGC It’s a form of amplification where the camera will automatically boost the image received in much lower light conditions than standard in order to optimize the clarity of image in poor light scene.

  • Page 23: Sens-Up

    HD-SDI IR Bullet Camera·User Manual 3.3.3 SENS-UP If you select shutter as AUTO or 1/25, the SENS-UP is adjustable (OFF/AUTO), and the SENS-UP is disabled if any other shutter speed is selected. SENS-UP increases the exposure on a signal frame, which makes a camera more sensitive to light so it can produce images even in low lux conditions.

  • Page 24: Defog

    HD-SDI IR Bullet Camera·User Manual Set the D-WDR to ON to improve the image quality under the backlight environment. Set the D-WDR to OFF to disable the function. 3.3.6 Defog DEFOG is used in special environment such as the foggy or rainy weather or in high illumination, in which the dynamic range is lower than that in the ordinary environment and the image always appear hazy.

  • Page 25: Backlight

    HD-SDI IR Bullet Camera·User Manual Steps: Move the cursor to POS/SIZE, and press OK to enter the position and size configuration interface. Move the joystick up/down/right/left to define the position of the defog area. Press OK again to switch the position configuration to the size configuration.
  • Page 26 HD-SDI IR Bullet Camera·User Manual Backlight Compensation (BLC) If there’s a strong backlight, the object in front of the backlight will appear silhouetted or dark. BLC bases on the back area to enhance the brightness of the whole image, which makes it possible to see the area before the strong backlight clearly, but the backlight area will be over-exposed.
  • Page 27 HD-SDI IR Bullet Camera·User Manual (Optional) Move the cursor to DEFAULT and press OK to restore the BLC settings to the default. ↑ ← POSITION→ ↓ Figure 3-5 Define a BLC Area HSBLC HSBLC 1. SELECT AREA 1 ON  2.
  • Page 28 HD-SDI IR Bullet Camera·User Manual Steps: Set the cursor right/left to select HSBLC and press OK to enter the edit interface. Move the cursor to SELECT and select the area by setting the joystick to left/right. Four areas are selectable. Set the DISPLAY to ON /OFF to enable/disable the HSBLC area.

  • Page 29: White Balance (Wb)

    HD-SDI IR Bullet Camera·User Manual  DEFAULT Selecting DEFAULT will restore all the HSBLC settings to the default value. 3.5 White Balance (WB) White balance is the white rendition function of the camera to adjust the color temperature according to the environment. It can remove the unrealistic color casts in the image.

  • Page 30: Day & Night

    HD-SDI IR Bullet Camera·User Manual MANUAL WB BLUE ---|------ 51 ---|------ 50 RETURN RET Figure 3-7 Manual White Balance  ATW mode refers to the white balance is continuously being adjusted in real-time according to the color temperature of the scene illumination.
  • Page 31 HD-SDI IR Bullet Camera·User Manual  The image is black and white all the time, and the IR LED turns on in the low-light conditions.  The image switches from color to B/W or from B/W to color automatically according to the light condition. And you can select to turn on or turn off the IR LED according to different illumination.
  • Page 32 HD-SDI IR Bullet Camera·User Manual Compared to traditional general 2D NR technology, 3D NR processes the noise reduction between two frames instead of in one frame. It can decrease the noise effect, especially when capturing moving images in low light conditions and delivering more accurate and sharp image quality.

  • Page 33: Special

    HD-SDI IR Bullet Camera·User Manual The 3D NR level ranges from 0 to 100. You can set a threshold to enable AGC from Start. AGC, and set a threshold to disable AGC from End.AGC. 3.8 SPECIAL In the SPECIAL sub-menu, you can set the camera name, the digital effect of the image, the motion detection, privacy task, language, dead pixel correction, and check the version of the camera.
  • Page 34 HD-SDI IR Bullet Camera·User Manual CAM TITLE 0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z ▶ → ←↑↓( ) ¯...

  • Page 35: D-Effect

    HD-SDI IR Bullet Camera·User Manual (Optional) Move the cursor to CLR to clear all the selected characters. Move the cursor to END and press OK to save the settings and return to the previous menu. 3.8.2 D-effect D-EFFECT 1. FREEZE 2.
  • Page 36 HD-SDI IR Bullet Camera·User Manual V-FLIP: The image flips 180 degree vertically. ROTATE: The image flips 180 degrees both horizontally and vertically.  D-ZOOM You can set the D-ZOOM as ON to zoom in the image. When digital zoom is processed, the image will be enlarged without gaining the actual pixel.
  • Page 37 HD-SDI IR Bullet Camera·User Manual SMART D-ZOOM 1. SELECT AREA1 2. DISPLAY 3. SENSITIVITY ---|----31 4. D-ZOOM x 2.0 5.TIME --|-------3 6.DEFAULT 7.RETURN Figure 3-15 Smart D-Zoom D-Zoom and Smart D-Zoom cannot take effect simultaneously. 2 areas are selectable. Move the joystick up/down to select the area. Set the display ON/OFF to display/not display the smart D-Zoom area.

  • Page 38: Motion

    HD-SDI IR Bullet Camera·User Manual  NEG.IMAGE You can set the NEG IMAGE as ON or OFF, and if you set it as on, the bright area and the dark area of the image are reversed. 3.8.3 Motion In the user-defined motion detection surveillance area, the moving object can be detected and the alarm will be triggered.

  • Page 39: Privacy

    HD-SDI IR Bullet Camera·User Manual Press OK to enter the area size configuration interface after the position is defined. Move the joystick up/down/left/right to define the size of the selected area. Press OK to confirm the size configuration and select RET to return to the motion menu, and select AGAIN to try again.
  • Page 40 HD-SDI IR Bullet Camera·User Manual PRIVACY 1. SELECT AREA 1  2. DISPLAY MOSAIC 3. COLOR 4. TRANS.  5. DEFAULT 6. RETURN Figure 3-17 Privacy Mask Set a Privacy Mask: Steps: 1. Move the cursor to SELECT and select a privacy mask area. Eight areas are selectable.

  • Page 41: Language

    HD-SDI IR Bullet Camera·User Manual The Color and TRANS [0-3] only works when the display is set to color. Move the joystick up/down/left/right to define the position of the selected privacy mask area. Press OK to enter the area size configuration interface after the position is defined.
  • Page 42 HD-SDI IR Bullet Camera·User Manual DEFECT 1. LIVE DPC AUTO 2. STATIC DPC ON  3. BLACK DPC 4. RETURN Figure 3-18 Defective Pixel Correction  LIVE DPC Live DPC detects and corrects the dynamic or the real-time defective pixels occur during the using. ON, OFF and AUTO is selectable. The correction level [0-255] is configurable if the live DPC is set to ON;...
  • Page 43 HD-SDI IR Bullet Camera·User Manual Steps: 1. Set the static DPC as ON, and press OK to enter the static DPC edit interface. 2. Move the cursor to START, and press OK to start correcting the defective pixels. 3. Press OK when you see the message of CLOSE THE IRIS THEN PRESS ENTER KEY showing up on the screen.

  • Page 44: Version

    HD-SDI IR Bullet Camera·User Manual Steps: Move the cursor to START, and press OK to confirm. Press OK to start black DPC correction. The DPC detection and correction levels are adjustable [0-255], and the DIFF.TH refers to the threshold value the device judges a pixel to a black pixel.

  • Page 45: Sharpness

    HD-SDI IR Bullet Camera·User Manual 3.9.1 Sharpness Sharpness determines the amount of detail an imaging system can reproduce. And you can adjust the sharpness from 0 to 15. The higher the value is, the clearer and sharper the image appears. 3.9.2 Monitor Monitor CRT, and Monitor LCD are selectable.

  • Page 46: Lsc

    HD-SDI IR Bullet Camera·User Manual 1. GAMMA AUTO ----|----50 2. BLUE GAIN ----|----50 3. RED GAIN 4.RETURN Figure 3-23 Monitor LCD 3.9.3 LSC Lens Shading Correction (LSC) corrects the phenomenon where the image gets darkened or blurred on the periphery. Set it ON, move the cursor to SCAN and press OK to correct the lens shading.

  • Page 47: Reset

    HD-SDI IR Bullet Camera·User Manual 3.10 RESET Reset all the settings to the default. 3.11 EXIT Move the cursor to EXIT and press OK to exit the menu.
  • Page 48 HD-SDI IR Bullet Camera·User Manual...

This manual is also suitable for:

Ds-2cc12d5s-it5Ds-2cc12d5s-ir

Table of Contents