1. Manuals
  2. Brands
  3. HIKVISION Manuals
  4. Security Camera
  5. DS-2CC52C1S-VPIR
  6. User manual

HIKVISION DS-2CC52C1S-VPIR User Manual

720p sdi camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Camera
720P SDI Camera
User Manual
UD.6L0201D1327A01
0

Advertisement

Table of Contents
loading

Related Manuals for HIKVISION DS-2CC52C1S-VPIR

Summary of Contents for HIKVISION DS-2CC52C1S-VPIR

  • Page 1 Camera 720P SDI Camera User Manual UD.6L0201D1327A01...
  • Page 2 Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. This manual applies to the model as follows: Type Model Dome Camera DS-2CC52C1S-VPIR Type I Turret Camera DS-2CC52C2S-IRM Type II Turret Camera DS-2CC52C2S-IT3P Type I Bullet Camera...
  • Page 3 720P SDI Camera·User Manual PERFORMANCE OR RELIABILITY OF ANY SECURITY OR SIGNALING RELATED FUNCTIONS OF THIS PRODUCT. 0100001031213...

  • Page 4: Regulatory Information

    720P SDI Camera·User Manual Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply with the limits for a digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
  • Page 5 720P SDI Camera·User Manual 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union. For proper recycling, return this product to your local supplier upon the purchase of equivalent new equipment, or dispose of it at designated collection points.

  • Page 6: Safety Instruction

    720P SDI Camera·User Manual Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger or property loss. The precaution measure is divided into “Warnings” and “Cautions” Warnings: Serious injury or death may occur if any of the warnings are neglected.
  • Page 7 720P SDI Camera·User Manual the IEC60950-1 standard. Please refer to technical specifications for detailed information.  Do not connect several devices to one power adapter as adapter overload may cause over-heating or a fire hazard.  Please make sure that the plug is firmly connected to the power socket.
  • Page 8 720P SDI Camera·User Manual  Do not aim the camera at the sun or extra bright places. Blooming or smearing may occur otherwise (which is not a malfunction), and affect the endurance of sensor at the same time.  The sensor may be burned out by a laser beam, so when any laser equipment is in using, make sure that the surface of sensor will not be exposed to the laser beam.

  • Page 9: Table Of Contents

    720P SDI Camera·User Manual Table of Contents 1 Introduction .................. 10 1.1 Product Features ............10 1.2 Overview ............... 11 1.2.1 Overview of Dome Camera......... 11 1.2.2 Overview of Turret Camera ........ 12 1.2.3 Overview of Bullet Camera ......... 14 2 Installation ..................
  • Page 10 720P SDI Camera·User Manual 3.3.3 B/W ..............37 3.3.4 SMART ..............38 3.4 IMAGE SETUP ..............38 3.4.1 BRIGHTNESS ............39 3.4.2 CONTRAST ............39 3.4.3 COLOR GAIN ............39 3.4.4 SHARPNESS ............40 3.4.5 NR ..............40 3.4.6 MIRROR .............. 40 3.4.7 LANGUAGE ............

  • Page 11: Introduction

    720P SDI Camera·User Manual 1 Introduction 1.1 Product Features This series of camera adopts high-sensitive sensor and advanced circuit board design technology. It features high resolution, low distortion, and low noise features, etc., which make it extremely suitable for surveillance system and image process system. The main features of 720P SDI cameras are as follows: ...

  • Page 12: Overview

    720P SDI Camera·User Manual 1.2 Overview 1.2.1 Overview of Dome Camera Figure 1-1 Overview of SDI Dome Camera Table 1-1 Description of Dome Camera Description Description Mounting Base IR LED Menu Button Lens Black Liner Power Cable Bubble Video Output...

  • Page 13: Overview Of Turret Camera

    720P SDI Camera·User Manual 1.2.2 Overview of Turret Camera Overview of Type I Turret Camera Figure 1-2 Overview of Type I Turret Camera Table 1-2 Description of Type I Turret Camera Description Description Enclosure Power Cable Mounting Base Video Output Cable Dome Drive...
  • Page 14 720P SDI Camera·User Manual Overview of Type II Turret Camera Figure 1-3 Overview of Type II Turret Camera Table 1-3 Description of Type II Turret Camera Description Description Trim Ring Dome Drive Enclosure Video Output Cable Mounting Base Power Cable...

  • Page 15: Overview Of Bullet Camera

    720P SDI Camera·User Manual 1.2.3 Overview of Bullet Camera Overview of Type I Bullet Camera Figure 1-4 Overview of Type I Bullet Camera Table 1-4 Description Description Description Mounting Base Lens Adjustable Nut Video Output Cable Sun Shield Power Cable IR LED...
  • Page 16 720P SDI Camera·User Manual Overview of Type II Bullet Camera Figure 1-5 Overview of Type II Bullet Camera Table 1-5 Description Description Description Sun Shield Power Cable Lens Video Output Cable IR LED Mounting Base Adjustable Screw...
  • Page 17 720P SDI Camera·User Manual Overview of Type III Bullet Camera Figure 1-6 Overview of Type III Bullet Camera Table 1-6 Description Description Description Sun Shield Power Cable Lens Video Output Cable IR LED Mounting Base Adjustable Screw...

  • Page 18: Installation

    720P SDI Camera·User Manual 2 Installation Before you start:  Please make sure that the device in the package is in good condition and all the assembly parts are included.  Make sure that all the related equipment is power-off during the installation.

  • Page 19: Installation Of The Dome Camera

    720P SDI Camera·User Manual cover, clean the dome cover with clean soft cloth and isopropyl alcohol.  Make sure that there is no reflective surface too close to the camera lens. The IR light from the camera may reflect back into the lens causing reflection.
  • Page 20 720P SDI Camera·User Manual 2. Loosen the set screws with a hex key (supplied) to remove the bubble. Figure 2-2 Remove the Bubble 3. Fix the mounting base on the ceiling with screws. Figure 2-3 Fix the Mounting Base...
  • Page 21 720P SDI Camera·User Manual 4. Adjust the Lens to the required surveillance angle. Adjust the pan direction [0°~180°]. Adjust the tilt direction [0°~75°]. Rotate the camera [0~360°] to adjust the lens Tighten the tilt lock screw to complete the installation. Figure 2-4 Angle Adjustment As the lens has already been factory adjusted to the best imaging...
  • Page 22 720P SDI Camera·User Manual Figure 2-5 Bubble Reinstallation Figure 2-6 Complete the Installation...

  • Page 23: Installation Of Turret Camera

    720P SDI Camera·User Manual Remove the protection film softly before using the camera In case of the scrape on the bubble during the project. 2.2 Installation of Turret Camera 2.2.1 Type I Turret Camera Installation Steps: 1. Drill the screws holes on the ceiling according to the supplied drill template.
  • Page 24 720P SDI Camera·User Manual 2. Route the cables through cable hole of the mounting base. 3. Fix the mounting base to the ceiling with the supplied screws. 4. Connect the corresponding power cable and video cable. 5. Fix the camera to the mounting base. Figure 2-8 Secure the Camera 6.
  • Page 25 720P SDI Camera·User Manual Figure 2-9 Install the Camera and the Enclosure 7. Adjust the camera according to the figure below to get an optimum angle. Figure 2-10 Lens Adjustment...

  • Page 26: Type Ii Turret Camera Installation

    720P SDI Camera·User Manual 2.2.2 Type II Turret Camera Installation 1. Drill the screw holes and the cable hole according to the drill template. Figure 2-11 Drill Template of Type II Turret Camera 2. Fix the mounting base to the ceiling with the supplied screws. Figure 2-12 Fix the Mounting Base...
  • Page 27 720P SDI Camera·User Manual 3. Route the cables to the cable hole and connect the corresponding power cable and video cable. 4. Fix the camera to the mounting base. 5. Fix the enclosure to camera. Figure 2-13 Fix the Camera 6.
  • Page 28 720P SDI Camera·User Manual Figure 2-14 Attach the Trim Ring 7. Adjust the surveillance angle according to the figure below. Figure 2-15 Lens Adjustment 8. Rotate the trim ring to get it fixed with the camera to complete the installation.

  • Page 29: Installation Of Bullet Camera

    720P SDI Camera·User Manual Figure 2-16 Complete the Installation 2.3 Installation of Bullet Camera 1.1.2 Type I Bullet Camera Installation Both wall mounting and ceiling mounting are suitable for type I HD-SDI IR bullet camera. Ceiling mounting will be taken as an example in this section.
  • Page 30 720P SDI Camera·User Manual Figure 2-17 Drill Template 2. Route the corresponding cables. 3. Secure the camera to the ceiling with the supplied PA4 Screws. Figure 2-18 Secure the Camera to the Ceiling...

  • Page 31: Type Ii Bullet Camera Installatio

    720P SDI Camera·User Manual 4. Connect the corresponding power/ Video Output cables. 5. Adjust the Lens. Loosen the adjustable nut. Adjust the pan direction [0°~360°]. Adjust the tilt direction [0°~90°]. Rotate the camera [0~360°] to adjust the lens to the surveillance angle.
  • Page 32 720P SDI Camera·User Manual as an example in this section. And you can take steps of wall mounting as a reference if ceiling mounting is adopted. Steps: 1. Drill the screw holes on the wall according to the drill template. Figure 2-20 Drill Template 2.
  • Page 33 720P SDI Camera·User Manual 5. Adjust the Lens. Loosen screw 1 to adjust the pan direction [0°~360°]. Tighten the screw after completing the adjustment. Loosen screw 2 to adjust the tilt direction [0°~100°]. Tighten the screw after completing the adjustment. Loosen screw 3 and rotate the camera [0°~360°] to adjust the lens to the surveillance angle.

  • Page 34: Menu Description

    USER RATE Figure 3-1 Main Menu Overview  Only DS-2CC52C1S-VPIR supports OSD Menu operation.  This type of camera adopts a joystick to select the menu and confirm a selection.  Move the joystick up/down to select the menu item.

  • Page 35: Exposure

    720P SDI Camera·User Manual 3.1 EXPOSURE EXPOSURE SHUTTER BRIGHTNESS RETURN  Figure 3-2 Exposure The EXPOSURE menu describes the brightness-related parameters. You can adjust the image brightness by the SHUTTER, AGC, and BRIGHTNESS in different light conditions. 3.1.1 SHUTTER SHUTTER denotes the speed of the shutter. AUTO, 1/100, 1/120, 1/250, 1/500, 1/1k, 1/2k, 1/4k, 1/10k, and 1/100k are selectable.

  • Page 36: Brightness

    720P SDI Camera·User Manual The noise will be amplified if the AGC is on. 3.1.3 BRIGHTNESS BRIGHTNESS refers to the brightness of the image. You can adjust the brightness with moving the joystick left and right to darken or brighten the image. A value bar is designed to show the changes of the value.

  • Page 37: Outdoor

    720P SDI Camera·User Manual 3.2.2 OUTDOOR OUTDOOR mode is applicable to the outdoor environment whose color temperature is relatively obvious. 3.2.3 AUTO AUTO mode refers to the white balance is being adjusted automatically in real-time according to the color temperature of the scene illumination.

  • Page 38: Auto

    720P SDI Camera·User Manual  D>N LEVEL: the D>N LEVEL refers to the degree of light intensity decrease. The day mode switches to the night mode when the light condition reaches to the level you set.  N>D LEVEL: the N>D LEVEL refers to the degree of light intensity increase.

  • Page 39: Smart

    720P SDI Camera·User Manual 3.3.4 SMART You can adjust the D>N LEVEL and N>D LEVEL by moving the joystick left and right. You can also select to turn on/turn off the IR LED by selecting the LED as ON/OFF to satisfy the requirements of different circumstances.

  • Page 40: Brightness

    720P SDI Camera·User Manual IMAGE SETUP BRIGHTNESS CONTRAST COLOR GAIN SHARPNESS MIRROR LANGUAGE FRAME RATE RETURN  Figure 3-7 Video Setup 3.4.1 BRIGHTNESS BRIGHTNESS refers to the brightness of the image. You can adjust the brightness with moving the joystick left and right to darken or brighten the image.

  • Page 41: Sharpness

    720P SDI Camera·User Manual 3.4.4 SHARPNESS SHARPNESS determines the amount of detail that an imaging system can reproduce. You can adjust the image SHARPNESS by moving the joystick left and right. 3.4.5 NR The NR function is used to reduce the noise in the video signal. You can set the NR level as High, Middle, and LOW.

  • Page 42: Func.setup

    720P SDI Camera·User Manual 3.5 FUNC.SETUP In the FUNC.SETUP menu, you can set the FLICKER frequency, OSD COLOR, and OSD BG for your camera. SYSTEM SETUP FLICKER OSD COLOR WHITE OSD BG RETURN  Figure 3-8 System Setup  FLICKER 50HZ and 60HZ are selectable for the FLICKER frequency.
  • Page 43 720P SDI Camera·User Manual...

This manual is also suitable for:

Ds-2cc52c2s-it3pDs-2cc52c2s-irmDs-2cc12c2s-irDs-2cc12c2s-it5Ds-2cc12c2s-it3

Table of Contents