Parts Description; Functional Description; Installing Or Removing Battery Cartridge - Makita DUR364L Instruction Manual

PARTS DESCRIPTION

1 Battery cartridge
5 Main power button
9 Protector (cutting tool
guard)
* The shape of the protector varies depending on the country.
FUNCTIONAL
DESCRIPTION
WARNING:
• Always be sure that the tool is switched off
and the battery cartridge is removed before
adjusting or checking function on the tool.
Failure to switch off and remove the battery
cartridge may result in serious personal injury
from accidental start-up.
Installing or removing battery
cartridge
► Fig.4: 1. Red indicator 2. Button 3. Battery cartridge
1
2
7
8
9
2 Lock-off lever
6 Reverse button
10 Shoulder harness
3
5
3 Switch trigger
7 Hanger
- -
CAUTION:
• Always switch off the tool before installing or
removing of the battery cartridge.
Hold the tool and the battery cartridge firmly
•
when installing or removing battery car-
tridge. Failure to hold the tool and the battery
cartridge firmly may cause them to slip off your
hands and result in damage to the tool and
battery cartridge and a personal injury.
To remove the battery cartridge, slide it from the tool
while sliding the button on the front of the cartridge.
To install the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Insert it all the way until it locks in place
with a little click. If you can see the red indicator on the
upper side of the button, it is not locked completely.
11 ENGLISH
4
6
10
4 Power lamp
8 Grip
- -