Changing The Fuel Filter; Adjusting The Carburettor; Maintenance Interval Table; Storage - Grizzly MTS 52-15 E2 Translation Of The Original Instructions For Use

GB

Changing the Fuel Filter

(Pic. 14)
Never operate the equipment
without a fuel filter. Change the
fuel filter regularly.
1. Drain the fuel tank (2) into an appropri-
ate container.
2. Pull the fuel suction head (50) out of the
tank with a hook and turn to pull it off.
3. Replace the fuel filter and place the
removed suction head back in the tank

Maintenance Interval Table

Regularly carry out the maintenance operations listed in the following table. The life of
the saw is extended by regular maintenance of your chainsaw. Furthermore, you get
optimum cutting performance and avoid accidents.
Machine Part
Screws, nuts, bolts
Air filter
Fuel filter
Spark plug
Fuel hoses
Complete machine
Operating handle
Cutting head

Storage

General Storage Instructions

• Clean the equipment and accessories
carefully before storage.
• Keep the equipment in a dry and dust-
proof place out of reach of children.
108
pic. 14
2

Adjusting the Carburettor

The carburettor is preset in the factory for
optimal performance. If subsequent ad-
justments are required, have them carried
out by a specialist workshop.
Action
Check, tighten
Clean or replace
Replace
Clean/adjust/replace
Check, replace if necessary
Check, clean if necessary
Check for function
Check correct installation
•
•
Before
Each Use




Do not wrap the equipment in plastic
bags, as damp and mould may form.
Do not store the equipment on the
protective cover; ideally hang it from
the top handle.
50
Operating Hours
10 20



