By pressing the enter key
through the arrow keys you can scroll the list of the devices in alarm.
Device in Alarm
D = Detector
M = module
Text programmed
For this Device
Condition with Fault zone events
The following display appears when the control unit is in condition of zone faults.
Fault events are also initially displayed for zone
Zone with Fault events
Text programmed
for this zone
Through arrow keys you can scroll the list of the Zone Faults.
Through a first pressure of the enter key
name; refer to the following figure:
Pag. 6
NOTIFIER ITALIA
you can access the list of point in alarm of the zone selected on the display,
you can display the list of devices with the indication of the point
Programming Manual
Doc. M-160.2-AM-8000-ENG Rev A1
Counter
for Faulty zones
SERIEAM
AM8000_manu-prog-ENG