Honeywell NOTIFIER AM-8000 Programming Manual page 42

History Log CLEAR:

By selecting the "Clear" function the following display appears:
History Log Disable:

Through the "Disable" control (when activated) all new events arriving from both the detection lines and the
keyboard are not stored in the historical file.
In case of History Log was disabled , a System Fault is signalled in the Faults List
Pag. 38
NOTIFIER ITALIA
Programming Manual
Doc. M-160.2-AM-8000-ENG Rev A1
selecting "Display" the first 3 event are
diplayed
Use the arrows keys to scroll the list of all
events.
Press the enter key
cancellation of all events stored in the
historical event.
To change this parameter in this folder
press the enter key
through the arrow keys  "YES" or
"NO"
Note
the "Disable" function is "NO" by default.
AM8000_manu-prog-ENG
to perform the
and select
SERIEAM