Table of Contents
Advertisement
Where:
TYPE = Type of devices found ( see table above)
ew device found
NEW = N
NFO = Devices previously programmed but not coherent with what was detected during the Auto-Learn
procedure
TOT
= total of devices detected on the line ( NEW + INC + correctly programmed devices.)
MAN = Devices previously programmed but not detected during the Auto-Learn
The CONF control saves the devices detected during the Self-Learn according to the following mode:
- NEW and INC are initialised through the default data.
- MAN are removed
- The correctly programmed devices keep the current programming
The data relevant to the initialized devices can be subsequently changed by entering the point programming
procedure.
The PROT ( Protocol ) control can display the table of devices for one of the two possible protocols: CLIP or ADV
Auto-Learn
Summary
Type
PHOT
THER
CMA1
MMA1
Pag. 24
NOTIFIER ITALIA
NEW
NFO
TOT
000
000
002
000
000
005
000
000
004
000
000
005
Doc. M-160.2-AM-8000-ENG Rev A1
Sample screen for CLIP detectors.
MIS
Important Note :
000
000
On Each Line can be installed
000
a max number of 10 device using CLIP protocol.
000
Programming Manual
SERIEAM
AM8000_manu-prog-ENG
Advertisement
Table of Contents
