AEG 43036IW-MN User Manual page 36

36 www.aeg.com
The appliance does not
operate
The appliance does not
operate
The appliance does not
operate
The appliance does not
operate
The appliance does not
operate
The appliance does not
operate
The appliance does not
operate
The food boils or fries
too slowly
The signal clock does
not work
The oven does not heat
up
The oven lamp does not
operate
The core temperature
sensor does not work
The oven display shows
"F11"
The display shows an er-
ror code that is not in
this list
Problem Possible cause
The fuse in the fuse box
is released
The power plug is not
correctly put in
The earth fault switch is
switched off
The Child safety device,
Lock or Key Lock oper-
ates
The appliance is not acti-
vated
The clock is not set
The "Automatic switch-
off" is on
The cookware is not cor-
rect for the heat conduc-
tivity
The time is not set
The necessary settings
are not set
The oven lamp is defec-
tive
The core temperature
sensor is not correctly
put into the core tem-
perature sensor socket
The core temperature
sensor is not correctly
put into the core tem-
perature sensor socket
There is an electronic
fault
Remedy
Control the fuse. If the
fuse is released more
than one time, refer to a
qualified electrician.
Put in the power plug
correctly
Switch on the earth fault
switch
Refer to "Hob - Daily
Use" or "Oven- Daily
Use" chapter.
Activate the appliance
Set the clock
Refer to "Automatic
switch-off"
Use correct cookware
with good heat conduc-
tivity
Set a time
Control the settings
Replace the oven lamp
Remove the core tem-
perature sensor and put
it in the core tempera-
ture sensor socket again.
Set the necessary tem-
perature
Put the core temperature
sensor correctly into the
core temperature sensor
socket
• Deactivate the appli-
ance with the house
fuse or the safety
switch in the fuse box
and activate it again
• If the display shows
the error code again,
refer to the Customer
Care Department