AEG 43036IW-MN User Manual page 34

34 www.aeg.com
Removing the door:
1
When the cleaning procedure is comple-
ted, insert the oven door in the opposite
sequence. Make sure that you hear a
click when you insert the door. Use force
if necessary.
Removing and cleaning the door glasses
B
To install panels, do the above steps in
the opposite sequence.
2
1. Open the door fully.
2. Move the slider until you hear a click.
3. Close the door until the slider locks.
4. Remove the door.
To remove the door, pull the
door outwards first from one
side, and then the other.
11.3 Oven glass panels
The door glass on your product
can be different in type and
shape from the examples you
see in the diagrams. The number
of glasses can also be different.
1. Hold the door trim (B) on the top
edge of the door at the two sides
and push inwards to release the clip
seal.
2.
Pull the door trim to the front to re-
move it.
3. Hold the door glass panels on their
top edge one by one and pull them
upwards from the guide.
4. Clean the door glass panels.
11.4 Oven lamp
WARNING!
Be careful when you change the
oven lamp. There is a risk of elec-
trical shock.