AEG 43036IW-MN User Manual page 18

18 www.aeg.com
8.5 Setting the oven function
Use
The display shows the recommended
temperature.
If you do not change the this tempera-
ture in less than approximately 5 sec-
onds, the appliance starts to heat.
When the appliance operates at
the set temperature, an acoustic
signal sounds.
You can change the oven func-
tion while the oven operates.
8.6 Changing the oven
temperature
Use or
8.7 Deactivating an oven
function
Press the oven function selection button
or
function shows in the display.
8.8 Heat- up indicator
When you activate an oven function, the
bars on the display come on one by one.
The bars show that the oven tempera-
ture increases.
8.9 Residual heat indicator
When you deactivate the oven, the bars
on the display show the residual heat.
8.10 Key lock
This function prevents that you acciden-
tally change the oven function.
Switching on the key lock
1. If necessary, switch on the appliance.
2. Set an oven function.
3.
Use Selection
time, until the display shows "LOC".
The key lock is switched on.
Switching off the key lock
1.
Use Selection
time, until the display stops to show
"LOC". The key lock switches off.
to set the oven function.
to set the temperature.
again and again until no oven
and
and
8.11 Oven automatic switch-
off
The appliance switches off after some
time:
• if you do not switch off the appliance.
• if you do not change the oven temper-
ature.
Oven tempera-
ture
30 - 120 °C
120 - 200 °C
200 - 250 °C
250 - max. °C
To operate the appliance after an auto-
matic switch-off, first deactivate the ap-
pliance fully.
8.12 Cooling fan
When the appliance operates, the cool-
ing fan activates automatically to keep
the surfaces of the appliance cool. If you
deactivate the appliance, the cooling fan
continues to operate until the tempera-
ture in the appliance cools down.
8.13 Core temperature sensor
The core temperature sensor measures
the core temperature of the meat.
1.
at the same
at the same
The key lock is automatically can-
celed when the oven function is
switched off.
Switch-off time
12.5 h
8.5 h
5.5 h
3.0 h
If you set clock function Duration
or End (if applicable), the auto-
matic switch-off will not operate.
Only use the core temperature
sensor supplied or genuine re-
placement parts.
Put the tip of the core temperature
sensor into the centre of the meat.