Grizzly GP 4645 Instructions For Use Manual page 17

• Do not use the equipment in
the vicinity of flammable liquids
or gases. Non-observance will
result in a risk of fire or explo-
sion.
• Do not use for water contain-
ing abrasive particles such as
sand. The dispensing of ag-
gressive, abrasive (grinding
effect), corrosive, combustible
(e.g. motor fuels) or explosive
liquids, salt water, cleaning
agents and foodstuffs is not
permitted. Liquid temperature
not to exceed 35°C.
• Store the equipment in a dry
place and out of reach of chil-
dren.
Caution! To avoid damage to
the equipment and any pos-
sible person injury resulting
from this:
• Do not work with damaged or
incomplete equipment, or with
equipment that has been con-
verted without the approval of
the manufacturer. Before initial
operation, have a specialist
check that the required electri-
cal protection measures are in
place.
• Do not carry or fix the equip-
ment by the cable or pressure
line.
• Protect the equipment from
frost and from running dry.
• Use only original accessories
and do not carry out conver-
sion work on the equipment.
• Please read the notes in the
operating instructions on the
topic of "Cleaning/Mainte-
nance" and "Cleaning". Any
measures above and beyond
these, particularly opening the
equipment, are to be carried
out by an electrician. In the
case of repairs, always contact
our service centre.
Electrical safety:
Caution: to avoid accidents
and injuries from electric
shocks:
• After erection, the mains plug
must be freely accessible when
the equipment is in operation.
• Before operating your new
pump, have a specialist check:
- The earthing, the protec-
tive multiple earthing; the
residual current circuit break-
ing must be compliant with
the safety regulations of the
energy supply company and
function without fault,
- The protection of the electri-
cal plug connections from
the wet.
- If there is a risk of flooding,
fix the plug connections in an
area that is safe from flood-
ing.
• Ensure that the mains voltage
matches the specifications on
the rating plate.
• The electrical installation shall
be according to national wiring
rules.
• Connect the equipment only
to a socket with a residual cur-
rent protection device (residual
current circuit breaker) with a
rated current of not more than
GB
17