Honda E Manual page 654

■
What to Do After the Power System Starts
Once your vehicle's power system has started, remove the jumper cables in the
following order.
1. Disconnect the jumper cable from your vehicle's nut of the 12-volt battery sensor
- terminal.
2. Disconnect the other end of the jumper cable from the booster battery -
terminal.
3. Disconnect the jumper cable from your vehicle's 12-volt battery + terminal.
4. Disconnect the other end of the jumper cable from the booster battery +
terminal.
Have your vehicle inspected by a nearby service station or a dealer.
uuIf the 12-Volt Battery Is Deadu
653