Honda E Manual page 573

uuCharginguUsing a Timer
Charge Lamp (blue)
a
Charge Lamp (blue)
a
572
7. To connect the cable to the vehicle.
u The charge lamp on the charge lid blinks
(blue).
u When connecting the charging cable to
the vehicle, insert the connector until it
hits the back so that it does not tilt.
■
When charging is completed
The charging connector to disengage it from
the inlet.
If the charging connector has a release
button, press it to release the charging
connector from the inlet.
u Make sure to put the cover back on the
inlet before you close the lid.
The charge lamp on the charge lid change to
blue.
1How to Charge (DC)
When you want to stop charging, follow the
instructions for the use of the charger.
Once the charging is stopped, you can release the
charging connector.
If the charging connector does not disengage, do not
engage it forcefully, and follow the procedures
mentioned in the following page.
2 If You Cannot Disengage the Charging
Connector P. 673