Honda E Manual page 223

uuAdjustment of Each Type of MirroruSide Camera Mirror System
■
Adjusting the Field of View
When the power mode is in ON, you can adjust the display's field of view.
■
Resetting the field of view
When the L/R selector switch
to up or to left for about five seconds to reset the field of view to factory settings.
222
■
: L/R selector switch
Choose which field of view to adjust by
moving the switch left or right. Return the
switch to the centre position after adjustment.
■
: Adjustment switch
This is the switch for adjusting the field of
view vertically and horizontally. When
adjusting the field of view,
the image.
is set to the centre, hold the adjustment switch
1Side Camera Mirror System
If a camera unit receives a strong impact or repairing
of the area near the camera is required, consult a
dealer.
If a camera lens is covered with dirt or moisture, use
a soft cloth moist with water or neutral detergent to
clean it. Do not use wax or water repellent agent on
the camera lens.
If a screen becomes dirty, use a soft cloth to keep it
clean.
NOTICE
will appear on
Do not apply hot water to camera units in cold
weather. The camera lens may fog up or crack due to
extreme changes in temperature.
1Adjusting the Field of View
Adjust the field of view before driving.
You can change between normal view and wide
view. The field of view will become wider when wide
view is chosen.
2 How to Customize the Vehicle Settings
P. 336
When in wide view, you can choose between two
horizontal fields of view. In wide view, you cannot
move the switch vertically and
screen.
will display on the