Honda E Manual page 160

■
Trip meter
Shows the total number of kilometres or miles driven since the last reset. Meters A
and B can be used to measure two separate trips.
Resetting a trip meter
To reset the trip meter, display it, press the left selector wheel and then select Reset.
The trip meter is reset to 0.0.
■
Average energy consumption
Shows the estimated average energy consumption of each trip meter in kWh/100km
or miles/kWh. The display is updated at set intervals. When a trip meter is reset, the
average energy consumption is also reset.
■
Instant energy consumption
Shows the instant energy consumption as a bar graph in kWh/100km or miles/kWh.
■
Range
Shows the estimated distance you can travel on the remaining power. This estimate
is based on the energy consumption of your previous trips and the remaining charge
of the High Voltage battery.
uuGauges and DisplaysuDriver Information Interface
1Trip meter
Switch between trip meter A and trip meter B by
rolling the left selector wheel.
1Average energy consumption
You can change when to reset the average energy
consumption.
2 Customized Features P. 327
1Range
The driving range displayed is only an estimate and
may differ to the actual distance the vehicle can
travel.
Continued 159