Honda E Manual page 568

Charge Lid
a
Inlet Cap
b
Charge Lamp (blue)
a
uuCharginguCharge the High Voltage battery using a AC or CCS2 DC charger
5. Open the charge lid.
6. Open the inlet cap.
7. To connect the cable to the vehicle.
u The charge lamp on the charge lid blinks
(blue).
1How to Charge (AC)
To avoid damage to the charger, take these
precautions:
•
Do not hit the charge connector components with
a hard object or drop them on the ground.
•
Do not pull, twist, tangle, drag or step on the
charging cable.
•
Do not use or store near any sources of heat.
•
Do not expose to liquids or use harsh chemicals to
clean.
If the charging connector does not disengage, do not
engage it forcefully, and follow the procedures
mentioned in the following page.
2 If You Cannot Disengage the Charging
Connector P. 673
Charge connector release control
When vehicle is locked
Press the release button with keyless remote.
When vehicle is unlocked
Press the release button.
Continued 567