Replace/Add The Power Adapter Card - Honeywell T5810XL Planning, Installation And Service Manual

5. Insert the new video card in the same PCIe slot 2, as illustrated in the following image.
6. Replace the cardholder and ensure that the tab locks in its place.
7. Replace the workstation cover and place the workstation in the furniture. Refer to the section,
Installing
5.3.2

Replace/add the power adapter card

The power adapter card is located in the PCI slot 6 in the workstation.
ATTENTION
Do not mix flat panel displays and CRTs is a multi-screen configuration on a single
platform.
for installing the workstation in the furniture.
- 80 -
Chapter 5 - Servicing