Honeywell T5810XL Planning, Installation And Service Manual page 56

4. Locate and connect the male end of the DB9 M/F COM port cable (51196990-500) to the COM port
on the OEP/IKB module assembly/adapter (51305776-100).
5. Secure the connection by tightening the thumbscrews located on the cable end.
6. Connect the female end of the DB9 M/F COM port cable (51196990-500) to COM 1 port located on
the back panel of the workstation and tighten the thumbscrews.
7. Insert the round DIN plug of the supplied IKB PS/2 cable (51305381-500) into the PS/2 connector
on the OEP/IKB module assembly (51305776-100).
8. Connect the free end of the IKB PS/2 cable (51305381-500) to the keyboard PS/2 port on the
workstation.
- 56 -
Chapter 3 - Installing