Xconfiguration Networkservices Https Verifyclientcertificate; Xconfiguration Networkservices Ntp Mode; Xconfiguration Networkservices Ntp Server [1..3] Address; Xconfiguration Networkservices Sip Mode - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

xConfiguration NetworkServices HTTPS VerifyClientCertificate

When the video system connects to a HTTPS client (like a web browser), the client can be
asked to present a certificate to the video system to identify itself.
Requires user role: ADMIN
Default value: Off
USAGE:
xConfiguration NetworkServices HTTPS VerifyClientCertificate:
VerifyClientCertificate
where
: Off/On
VerifyClientCertificate
Off: Do not verify client certificates.
On: Requires the client to present a certificate that is signed by a trusted Certificate
Authority (CA). This requires that a list of trusted CAs are uploaded to the system in
advance.

xConfiguration NetworkServices NTP Mode

The Network Time Protocol (NTP) is used to synchronize the system's time and date to a refer-
ence time server. The time server will be queried regularly for time updates.
Requires user role: ADMIN
Default value: Auto
USAGE:
xConfiguration NetworkServices NTP Mode:
where
: Auto/Manual/Off
Mode
Auto: The system will use an NTP server for time reference. As default, the server
address will be obtained from the network's DHCP server. If a DHCP server is not used,
or if the DHCP server does not provide an NTP server address, the NTP server address
that is specified in the NetworkServices NTP Server [n] Address setting will be used.
Manual: The system will use the NTP server that is specified in the NetworkServices
NTP Server [n] Address setting for time reference.
Off: The system will not use an NTP server. The NetworkServices NTP Server [n]
Address setting will be ignored.
SX20 Codec API Reference Guide CE8.3, JANUARY 2017.
D15316.05
About the API xConfiguration xConfiguration
Mode
xCommand

xConfiguration NetworkServices NTP Server [1..3] Address

The address of the NTP server that will be used when NetworkServices NTP Mode is set to
Manual, and when NetworkServices NTP Mode is set to Auto and no address is supplied by a
DHCP server.
Requires user role: ADMIN
Default value: 0.tandberg.pool.ntp.org
USAGE:
xConfiguration NetworkServices NTP Server
where
: Unique ID that identifies the NTP server. Range: 1..3
n
: String (0, 255)
Address
A valid IPv4 address, IPv6 address or DNS name.

xConfiguration NetworkServices SIP Mode

Define whether the system should be able to place and receive SIP calls or not.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration NetworkServices SIP Mode:
where
: Off/On
Mode
Off: Disable the possibility to place and receive SIP calls.
On: Enable the possibility to place and receive SIP calls (default).
77
API Reference Guide
xStatus Appendices
n Address: "Address"
Mode
Copyright © 2017 Cisco Systems, Inc. All rights reserved.