Honeywell VARIODYN D1 Installation Instruction page 50

Installation Instruction VARIODYN
Connecting universal interface module (UIM)  DOM
1. Use a patch cable CAT5 blue to connect the DAL connection of the DOM and the DAL connection of the UIM.
2. If external control inputs or outputs are present, wire them to the terminals of the UIM .
3. If external audio inputs or outputs are present, connect them to the CINCH or XLR sockets of the
UIM  and .
4. XLR socket: Pin 1 = shielding, pin 2 = tone wire A, pin 3 = tone wire B.
DOM
Fig. 41: Connection of the UIM to the DOM using CAT5 cable
DOM
max. 10 m
Fig. 42: Connection of the UIM to the DOM via fibre optic cable (FOC)
See chapter Fehler! Verweisquelle konnte nicht gefunden werden. for detailed information on the
fibre optic converter and the required external power supply
50
®
D1 System
UIM
DAL 1-4
UIM
DAL 1-4
OIM
(Part No. 583316.21)
CAT5, max. 300 m
(DCS-O)
Fibre optics cable
max. 2000 m
(Multimode)
(Part No. 583317.21)
max. 10 m
Power supply
or
via 24 V DC from system
FB 798663.GB0 / 05.19