Makita DVC860L Instruction Manual page 9

Model DVC861L
(Powder filter (for dry dust) model)
► 1. Tank cover 2. Powder filter (HEPA) 3. Damper
4. Prefilter 5. Tank
ASSEMBLY
CAUTION:
• Always be sure that the cleaner is switched off,
unplugged, and the battery cartridge is removed
before carrying out any work on the cleaner.
• Always wear dust mask during assembly or
maintenance.
Installing the powder filter (HEPA)
and prefilter (for dry dust)
Optional accessory for cloth filter model
CAUTION:
• Never pick up water or other liquids or wet dusts
when using the powder filter. Picking up such
things may cause the powder filter breakage.
1
2
3
4
5
► 1. Tank cover 2. Powder filter (HEPA) 3. Damper
► 1. Float 2. Float cage
To use powder filter, remove the float cage and float by
removing the bolts.
Place the prefilter in the tank.
Next, mount the damper on the powder filter and then
place them in the prefilter.
When installing powder filter and prefilter, align the
mounting position marking on each of them with that
one at the top of the tank.
Finally, mount the tank cover and lock it.
9 ENGLISH
6
6
6
4. Prefilter 5. Tank 6. Mounting position marking
1
NOTE:
• Before using the powder filter, make sure that
prefilter and damper are always used together. It
is not allowed to install powder filter solely.
1
2
3
4
5
2