Functional Description - Makita DVC860L Instruction Manual

The contained lithium-ion batteries
10.
are subject to the Dangerous Goods
Legislation requirements.
For commercial transports e.g. by third
parties, forwarding agents, special
requirement on packaging and labeling
must be observed.
For preparation of the item being
shipped, consulting an expert for haz-
ardous material is required. Please
also observe possibly more detailed
national regulations.
Tape or mask off open contacts and
pack up the battery in such a man-
ner that it cannot move around in the
packaging.
Follow your local regulations relat-
11.
ing to disposal of battery.
SAVE THESE
INSTRUCTIONS.
CAUTION:
Only use genuine Makita batteries.
Use of non-genuine Makita batteries, or batteries that
have been altered, may result in the battery bursting
causing fires, personal injury and damage. It will
also void the Makita warranty for the Makita tool and
charger.
Tips for maintaining maximum
battery life
1. Charge the battery cartridge before completely
discharged. Always stop tool operation and
charge the battery cartridge when you notice
less tool power.
2. Never recharge a fully charged battery car-
tridge. Overcharging shortens the battery
service life.
3. Charge the battery cartridge with room tem-
perature at 10 °C - 40 °C (50 °F - 104 °F). Let
a hot battery cartridge cool down before
charging it.
Charge the battery cartridge if you do not use
4.
it for a long period (more than six months).
FUNCTIONAL
DESCRIPTION
Use with AC power:
WARNING:
• Before plugging the cleaner, always make
sure that the cleaner is switched off. Plugging
the cleaner with the switch on may cause an
unexpected start resulting in serious personal
injury.
► 1. Plug (the shape and cord length may differ from
country to country)
Connect the plug to a power supply.
1
► 1. AC power indicator
The AC power indicator lights up when setting the
stand-by switch to "I" side.
NOTE:
• Even operating in DC power mode , the tool
is automatically changed into AC power mode
when plugged in.
• If the tool is unplugged during operation with the
battery inserted, the cleaner gets into stand-by
state.
5 ENGLISH
1
2
1