Process Commands - GE Druck DPI 740 User Manual

DPI 740 User Manual

Process commands

Command:
Format:
Description:
PC =<process definition>
PC =~(IR),<value>,<value>
PC =T(IR),<value>
PC =<(IR)
PC =>(IR)
PC =Q(IR),<value>,<value>
PC =A(IR),<value>
PR ?
PA =k
PM
Process definitions
Example: ~ filter
Note:
This filter does not affect the normal instrument
filter.
PC - Set-up process
PC = <process definition>
This command sets and defines the required
process of the instrument. The <process
definition> must be in the format shown in
the following table:
PC=~(IR,0.15,0.01)
Define filter input reading changing the <time
constant> and <band>.
Set-up Process
filter
tare
maximum
minimum
QFF
altitude
Get process reading
Enable automatic sending
of process reading
Reset process maximum
and minimum values.
K0200 Issue No. 1
47