GE Druck DPI 740 User Manual page 54

46
Command:IU - Set-up input units
Format:
Description:
Query:
Example:
Command:
Format:
Description:
Example:
Query:
Example:
K0200 Issue No. 1
IU=<index>
Set-up the units for the input in volatile
storage. The units are specified as <index>,
defined in Table 6-2.
A query of this command returns the index
units.
IU?
Reply: IU = <index>
a reply of IU=18 means units are inHg
IA - Enable automatic sending of input
reading
IA = k
Enables automatic sending of input reading.
The value `k` corresponds to `send every `k`th
conversion`. If `k` is 0, the automatic send
feature is disabled.
IA = 10
send a value every 10th conversion.
IA = 0
disable the automatic feature.
A query responds with an integer of the
automatic send interval in conversions.
IA?
Reply: IA = 10
DPI 740 User Manual