GE Druck DPI 740 User Manual page 4

DPI 740 User Manual ii
Battery Safety
This instrument is fitted with three size AA batteries either
rechargeable (nickel cadmium) or non-rechargeable (alkaline).
Before storing this instrument remove the batteries.
When fitting batteries make sure the electrical contacts are
clean and observe the correct polarity.
The battery compartment should be inspected for corrsion
caused by leaking batteries. Corrosion must be removed using
approved methods*.
When storing and transporting batteries make sure that they
cannot be short circuited. A short circuited battery can
become very hot and can, in certain circumstances, explode.
It is recommended that a suitable container is used for storing
and transporting batteries.
Dispose of old batteries using a safe, approved method.*
*Refer to the Battery Manufacturer for this information.
Software Version
This manual contains operating instructions for instruments
with software version 1.XX. Further changes to the
instrument's software may require a change to the operating
instructions and an issue number change of the manual.
K200 Issue No. 1