6.2.1
Use jacking bolts
Engage jacking bolts
Follow the instructions below to engage the jacking bolts.
Step
1
2
Xcellerex XDM 50-1000, XDUO 100-1000 mixers Operating Instructions 29251615 AD
NOTICE
Securing the jacking bolts in a way other than described in this
manual may damage the load cells.
Action
Verify the following conditions:
The instrument is clear of obstructions.
•
The jacking bolt threads are undamaged.
•
The jacking bolts are fully engaged in the mixer vessel frame.
•
The top and bottom nuts turn freely using fingers alone.
•
Turn up the bottom nut (1) with your fingers to the vessel support plate (2).
Then turn the nut one half turn with a wrench, so that the vessel weight is
lifted off from the load cell.
2
1
6 Preparation
6.2 Stabilize the mixer vessel
6.2.1 Use jacking bolts
133