Installation Of The Mixer - GE Xcellerex XDM Series Operating Instructions Manual

5.3

Installation of the mixer

Moving when unpacked
XDM and XDUO mixers can be rolled by hand on hard and level surfaces with wheel
brakes released.
Electrical installation
The customer must install an electrical plug on the main power cord of XDM and XDUO
mixers. The plug must comply with local regulations.
Configure the local control
software
It is recommended to configure the Administrator account when the instrument hard-
ware has been installed. See Manage the Administrator account, on page 298 for more
information.
Xcellerex XDM 50-1000, XDUO 100-1000 mixers Operating Instructions 29251615 AD
NOTICE
Always engage the jacking bolts before moving the instrument.
This prevents damage to the load cells.
WARNING
Electrical installation. All electrical installation must be performed
by authorized personnel only.
WARNING
High voltage. The system must always be connected to a
grounded power outlet.
5 Installation
5.3 Installation of the mixer
121