User manual for HON R100 gas pressure regulator with HON P095NG pilot
Figure
Step
Description
29
Check the metal foam insert (1) on the
inside for damage and soiling. Replace it
with a new one if necessary.
30
Insert the support cage (1), including the
metal foam insert, back into the body from
below.
31
Insert the spring plate (2) back into the
guide bush from above, making sure that
the plate opens upwards. Insert the
compression spring (1).
32
Insert the lower diaphragm plate (1).
33
Insert a new diaphragm. Glue the surfaces
to the diaphragm plate and to the body's
contact surfaces. Make sure that the bulge
points upwards.
Maintenance
58