Peripheral Hardware That Generates Wait - NEC 78K0/KD1 Series User Manual

29.2 Peripheral Hardware That Generates Wait

Table 29-1 lists the registers that issue a wait request when accessed by the CPU, and the number of CPU wait
clocks.
Table 29-1. Registers That Generate Wait and Number of CPU Wait Clocks
Peripheral Hardware
Watchdog timer
Serial interface UART0
Serial interface UART6
A/D converter
Note No wait cycle is generated for the CPU if the number of wait clocks calculated by the above expression is 1.
Remarks 1. The clock is the CPU clock (f
2. When the CPU is operating on the subsystem clock and the X1 input clock is stopped, do not access the
registers listed above using an access method in which a wait request is issued.
428
CHAPTER 29 CAUTIONS FOR WAIT
Register
WDTM Write
ASIS0 Read
ASIS6 Read
ADM Write
ADS Write
PFM Write
PFT Write
ADCR Read
<Calculating maximum number of wait clocks>
) × 2/(1/f
{(1/f )} + 1
MACRO CPU
*The result after the decimal point is truncated if it is less than t
(1/f ), and is rounded up if it exceeds t
CPU
f : Macro operating frequency
MACRO
(When bit 5 (FR2) of ADM = "1": f
f : CPU clock frequency
CPU
t : Low-level width of CPU clock
CPUL
).
CPU
Preliminary User's Manual U16315EJ1V0UD
Access Number of Wait Clocks
3 clocks (fixed)
1 clock (fixed)
1 clock (fixed)
2 to 5 clocks
(when ADM.5 flag = "1")
2 to 9 clocks
(when ADM.5 flag = "0")
1 to 5 clocks
(when ADM.5 flag = "1")
1 to 9 clocks
(when ADM.5 flag = "0")
after it has been multiplied by
CPUL
.
CPUL
/2, when bit 5 (FR2) of ADM = "0": f
X
Note
Note
2
/2 )
X