Cisco ONS 15454 Unpacking And Installing page 13

Four-shelf and zero-shelf bay assembly

Hide thumbs Also See for ONS 15454:

Installation Instructions

Once all fiber cables have been placed in the front portion of the rack, replace the base plate cover by

Step 3

sliding the cover toward the back of the rack and replacing the screws that hold the covers.

Figure 10

shows the routed fiber with the base plate cover replaced.

Figure 10

Raised floor base fiber routing

Mounting a Single Shelf Assembly

Mounting a single ONS 15454 in a rack requires a minimum of 18.5 inches of vertical rack space (plus

1 inch for air flow). To ensure the mounting is secure, use two to four #12-24 mounting screws for each

side of the shelf assembly.

Figure 11

shows the rack mounting position for the ONS 15454.

Unpacking and Installing the Cisco ONS 15454 Four-Shelf and Zero-Shelf Bay Assembly

78-13271-05