Table of Contents
Advertisement
24
6.
The commissioning of the device is described in chapter 10. The individual steps to be carried out while
the cover housing is open must be checked.
Then mount the housing cover, close it with the housing screws and seal it.
To assure safe and easy working, we recommend removing the battery holder during the
installation of the peripheral devices.
8.3
Installing the interface
Procedure for the installation / replacement of the interface:
- Switch the power supply off.
- Before removing the interface from the anti-
static film, discharge yourself
by first ouching the shield terminal bar
with both hands.
- Touch the interface only on the side and
try to avoid contact with
the connectors.
- Insert the interface. See illustration.
- Secure the interface with the provided screw.
- Please also read the document
accompanying the interface.
The ACS-2 plus is delivered without any Interface card.
Depending on the connection type, a corresponding interface card must be installed and
configured.
Installation instructions / ACS-2 plus
Advertisement
Table of Contents
