Table of Contents
Advertisement
Installation instructions / ACS-2 plus
9
3.
General information
Access control systems are required if, for safety reasons, access to rooms or buildings is reserved to a certain
group of persons only.
Software
Novar GmbH offers a powerful and practice-oriented access control system. MultiAccess for Windows or IQ
MultiAccess is the parent user software for the connected access control devices. The definition of the access
rights for persons, actions, time orders and the transmission of the data to the hardware are carried out by means
of this software.
Hardware
The ACS-Compact, ACS-1, ACS -2 plus and ACS-2 plus are used as access control controllers and are
responsible for the complete functional sequence. After receiving the data from MultiAccess for Windows or IQ
MultiAccess, the controllers are ready for stand-alone operation. This means that the access control remains
active without any restrictions even if MultiAccess for Windows or IQ MultiAccess is not running.
When starting MultiAccess for Windows or IQ MultiAccess, the bookings carried out in the meantime are
automatically entered in the booking log file.
The display panel is another device. This device is not used for access control but for the indication of the present
location of certain persons, the door states and actions.
The ethernet interface (LAN) links between the PC and the controllers and is also responsible for antipassback
control. The PC configured with IQ MultiAccess must be in operation.
When ACS-2 plus are used in simplified mode the interface converter 026817.03 can be used.
If only one ACS-2 plus is connected, direct connection via the serial interface RS232 is also possible.
Combinations of these connection versions are possible.
Advertisement
Table of Contents
