Test Your Headset Microphone - Cisco 8841 User Manual

Test Your Headset Microphone

Use the following steps to check if your microphone is working before you begin a call.
1. From your desk phone, press the Applications button
2. Select Status.
Select Accessories.
3.
4. Navigate to Setup > Microphone > Test.
5. Press Record and speak into the microphone.
6. Press Playback when you finish speaking and listen to the test recording.
Maximum recording time is 20 seconds.
Replace Your Cisco Headset Ear Pads
Your headset's ear pads are an important part of its performance. They provide comfort, grip,
and sound enhancement. With time, it's natural for ear pads to wear out, but you can replace
them easily.
Note: Cisco Headset 560 Series ear pads are not compatible with the
Cisco Headset 520 Series and Cisco Headset 530 Series.
Use the following steps to replace the Cisco headset ear pads.
1. Rotate the old ear pad counterclockwise.
2. Pull the old ear pad away from the speaker.
3. Push the new ear pad toward the speaker.
4. Rotate the new ear pad clockwise.
Cisco IP Phone 8841/8851 Multiplatform Phones User Guide
Accessories
.
66