Cisco 8841 User Manual page 70

You can connect the Cisco Headset 560 Series with any of the following:
The Cisco Headset 560 Series require Multiplatform Firmware Release 11.2(3) and higher.
Upgrade your phones to the latest firmware before using these headsets.
Use the following steps to check your phone model and the firmware version.
1. Press the Applications button
2. Select Status > Product information.
Result: The Product name field shows your phone model. The Software
version field shows the installed load where you can get the firmware version.
Cisco Headset 561 and 562 Buttons and LED
Your headset buttons are used for basic call features.
Figure 7.
The following table describes the Cisco Headset 561 and 562 Headset buttons.
Num Name
1 Power and
Call button
Cisco IP Phone 8841/8851 Multiplatform Phones User Guide
Cisco Headset 561 and 562 Headset Buttons
Description
Use to power the headset on and off.
Press and hold for 4 seconds to power on/off the headset.
Incoming and active call management depend on the number of
calls you have: one (1) or multiple.
One call:
•
•
•
.
Press once to answer incoming calls.
Press once to put an active call on hold. Press
again to retrieve the call from hold.
Press twice to reject an incoming call.
Accessories
62