Circuit Diagram - Makita UH7580 Technical Information

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -5. Switch lever B, Front grip and Protector
DISASSEMBLING
Refer to Fig. 10.
ASSEMBLING
1) When separating Front grip from Switch lever B;
- hook one end of Compression spring 9 with the protrusion of Front grip.
- hook the tab of Switch lever B with the edge of Front grip. And hook
the other end of Compression spring 9 with the protrusion of Switch lever B.
(Fig. 19)
2) Hook Front grip, Switch lever B and Protector complete with Housing set,
and then tighten two M5x30 Pan head screws to assemble Front grip,
Switch lever B and Protector complete to Housing set. (Fig. 10)
3) Set Shear blade ass'y in place. Refer to the clause of [3]-2.
C
ircuit diagram
Fig. D-1
Color index of lead wires' sheath
Black
White
Brown is used
for some countries.
W
iring diagram
Fig. D-2
Lead wires have to be insert into the bottom
of Lead wire holder here.
Terminal block
Terminal block
Blue is used
for some countries.
Noise suppressor
(if used)
Lead wires have to be insert into
the bottom of Lead wire holder here.
Fig. 19
protrusion of
Switch lever B
Noise
suppressor
(if used)
P 7/ 7
tab of Switch
lever B
protrusion of
Front grip
Compression
spring 9
Brush holder
Field
Connect Receptacles for
Motor so that their lead
wires face Housing L side.