Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Trimmer
  5. UH7580
  6. Technical information

Makita UH7580 Technical Information

Hide thumbs Also See for UH7580:
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
T
ECHNICAL INFORMATION
Model No.
Description
C
ONCEPT AND MAIN APPLICATIONS
Models UH7580/ UH6580/ UH5580 for professional
applications have been developed as the successors
to the current UH6540/ UH5540/ UH4540, featuring
renewed external appearance and more improved handling.
S
pecification
Voltage (V)
120
220
230
240
Specifications
Blade length: mm (")
No load speed: min-
Tooth pitch: mm (")
Protection from electric shock
Power supply cord: m (ft)
Net weight: kg (lbs)
*1: spm= strokes per minute
*2: Kuwait: 2.5m (8.2ft)
S
tandard equipment
Blade cover .................................... 1
Hook complete ................................ 1
Cord holder complete set ................ 1
Extension cord (10m) ..................... 1 (for UK [240V] only)
Note: The standard equipment for the tool shown above may differ by country.
O
ptional accessories
Shear blade assembly set
Blade cover
Hook complete
Cord holder complete set
Arm band complete set
Chip receiver assembly set
UH7580/ UH6580/ UH5580
Hedge Trimmers 750mm/ 650mm/ 550mm
Cycle (Hz)
Current (A)
5.9
50/60
3.2
50/60
3.1
50/60
3.0
50/60
Model No.
UH7580
750
(29-1/2)
=spm*
1
1
4.4
(9.7)
Model No.
Length (L)
1,157 (45-1/2) 1,049 (41-1/4) 970 (38-1/4)
Width (W)
Height (H)
Continuous Rating (W)
Input
---
670
670
670
UH6580
UH5580
650
550
(25-1/2)
(21-5/8)
1,500
28 (1-1/8)
Double insulation
0.3 (0.98)*
2
4.3
4.2
(9.4)
(9.2)
W
L
Dimensions: mm (")
UH7580
UH6580
223 (8-3/4)
206 (8-1/8)
Max. Output (W)
Output
330
500
380
500
380
500
380
500
PRODUCT
P 1/ 7
H
UH5580

Advertisement

loading

Related Manuals for Makita UH7580

Summary of Contents for Makita UH7580

  • Page 1 UH7580/ UH6580/ UH5580 Description Hedge Trimmers 750mm/ 650mm/ 550mm ONCEPT AND MAIN APPLICATIONS Models UH7580/ UH6580/ UH5580 for professional applications have been developed as the successors to the current UH6540/ UH5540/ UH4540, featuring renewed external appearance and more improved handling.

  • Page 2: Necessary Repairing Tools

    Removing Gear housing cover [2] LUBRICATION Apply Makita grease N. No.2 to the following portion to protect parts and product from unusual abrasion. Refer to Fig. 5. 1) Gear room (6g: Refer to Fig. 5.) 2) Contact portion of Shear blade ass’y and Crank (3g: Refer to Fig. 7) [3] DISASSEMBLY/ASSEMBLY [3] -1.
  • Page 3 P 3/ 7 epair [3] DISASSEMBLY/ASSEMBLY [3] -2. Shear blade ass’y and Gear ass’y (cont.) DISASSEMBLING 5) Loosen two M5x25 Pan head screws (threadlocker type) and separate Shear blade ass’y from the machine. (Fig. 6) Note: 1. Leave the two M5x25 Pan head screws in their holes of Shear blade ass’y when setting Shear blade ass’y in place without disassembly.
  • Page 4 6) Remove Lifter section from Housing L. (Fig. 13) Note: Lifter section of UH5580, UH6580 and UH7580 is different from that of UH4570, UH5570 and UH6570. Enlarge the distance between Pin holder and Cap holder using 1R003 with 1R212, and keep Compression spring 5 compress to separate the bottom end of Pin 5 from the hole of Gear housing.
  • Page 5 P 5/ 7 epair [3] DISASSEMBLY/ASSEMBLY [3] -3. Motor, Switch and Power supply cord (cont.) ASSEMBLING Take the disassembling step in reverse. Note: Refer to Fig. 16. 1) When setting Armature ass’y and Gear housing complete in place, pass Lever through Field ass’y at the same time while inserting the hinge portion of Lever into Housing L carefully because the hinge tends to remove.
  • Page 6 P 6/ 7 epair [3] DISASSEMBLY/ASSEMBLY [3] -4. Lifter section DISASSEMBLING Refer to the clause of [3]-3. ASSEMBLING Set the components in place while pay attention to the linked portions illustrated in Fig. 18. Three plates X, Y and Z of Lifter have to be linked with each appropriate portion in the following order. 1.

  • Page 7: Circuit Diagram

    P 7/ 7 epair [3] DISASSEMBLY/ASSEMBLY [3] -5. Switch lever B, Front grip and Protector DISASSEMBLING Fig. 19 Refer to Fig. 10. protrusion of tab of Switch Switch lever B lever B ASSEMBLING protrusion of Front grip 1) When separating Front grip from Switch lever B; - hook one end of Compression spring 9 with the protrusion of Front grip.

This manual is also suitable for:

Uh6580Uh5580