Makita UH7580 Technical Information page 5

R
epair
[3] DISASSEMBLY/ASSEMBLY
[3] -3. Motor, Switch and Power supply cord (cont.)
ASSEMBLING
Take the disassembling step in reverse.
Note: Refer to Fig. 16.
1) When setting Armature ass'y and Gear housing complete in place, pass Lever through Field ass'y at the same time
while inserting the hinge portion of Lever into Housing L carefully because the hinge tends to remove.
Insert the pin portion of Gear housing complete into Housing L as well.
2) When Armature ass'y, Field ass'y, Gear housing and Lever are set in place, Ball bearing 6000ZZ on Fan side of
Armature has to be partly exposed from Gear housing as illustrated in Fig. 17.
Fig. 16
Armature ass'y
Field ass'y
Pin portion of
Gear housing
Fig. 17
Hinge portion of
Lever
A part of Ball bearing 6000ZZ
Gear housing complete
A part of Ball bearing 6000ZZ has to
be exposed from Gear housing complete.
P 5/ 7