Exit Diagnostic Mode - Honeywell BW RigRat User Manual
Local area gas monitor
Hide thumbs
Also See for BW RigRat:
- Quick start manual (2 pages) ,
- Installation manual (2 pages) ,
- User manual (107 pages)
Table of Contents
Advertisement
BW RigRat User's Guide
Exit Diagnostic Mode
In Diagnostic Mode, press the button to navigate to the following screen. If you hold the button now,
the screen displays "OFF". Release the button. The instrument is now off.
Note: Keep holding the button down at this screen for 10 seconds. The RigRat will ask for the 4-digit
password. When the correct password is used, the RigRat enters normal operation mode with
diagnostic mode datalogging.
50
- Quick Links:
- Calibration
- Troubleshooting
- Error Codes
Hide quick links:
Advertisement
Table of Contents
