Traffic Advisory While In Map Display; Coast Mode - Honeywell BENDIX/KING KMD 550 Pilot's Manual Addendum

Multi-function display, traffic avoidance function, tcas/tas/tis, for software version 01/13 or later
Hide thumbs Also See for BENDIX/KING KMD 550:
Table of Contents

Advertisement

TRAFFIC ADVISORY
WHILE IN MAP DISPLAY
If a Traffic Advisory presents
itself while in the Map
Display a yellow TRFC will
be displayed as shown in
Figure 18. If AUTO-POP-UP
is enabled, a TA will cause
the Traffic display to be pre-
sented automatically. The
default range of the pop-up
display will be 7 nm.
Figure 18

COAST MODE

When intruders are displayed
and TIS information is not
received from the terminal
Mode S radar for one radar
scan, the altitude tag of the
intruder is replaced with the
text "CST" to inform the pilot
that the system is in Coast
mode. See Figure 19. This
means the displayed intruder
information is old and could
have changed since the last
Figure 19
update.
When two radar scans have
elapsed without TIS informa-
tion, the intruders are
removed from the display
and "TIS UNAVAILABLE" is
displayed in the center of the
screen as shown in Figure
20. Also, an audible "TIS
UNAVAILABLE" message
will be heard (if not muted).
The display will revert to
normal when TIS information
is again available.
Figure 20
17
Rev 2 Nov/2002
KMD 550/850 Traffic Addendum

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bendix/king kmd 850

Table of Contents