Honeywell Searchline Excel Open-Path Technical Handbook page 92

MAN0530 Issue 09 October 03
2104M0506
8.3.2 Receivers
Open-Path
Receiver
Class I Div 1 Groups B, C, D
Class I Zone 1 AEx d IIB + H2
(Tamb -40 to +65 C)
UL approved
UL approved
M20/0.5in. NPT adaptor
M20/0.75in. NPT or
1
Note: Later units /
M20/0.5in. NPT adaptor 2
threaded without adaptor
Flexible conduit
- must conform with the relevant US
installation codes of practice
(see Control Drawing 2104E0045)
Cross-Duct
Class I Div 1 Groups B, C, D
Class I Zone 1 AEx d IIB + H2
(Tamb -40 to +65 C)
UL approved
UL approved
M20/0.5in. NPT adaptor
M20/0.75in. NPT or
1
Note: Later units /
M20/0.5in. NPT adaptor
2
threaded without adaptor
Solid conduit
must conform with the relevant US
installation codes of practice
(see Control Drawing 2104E0045)
(see also "Electrical Insulation" Cross-Duct Section 4)
8. CERTIFICATION
o
" NPT
(customer supplied)
Receiver
o
" NPT
(customer supplied)
DX100/DX100 (M) UL
Termination Unit
Class I Div 1
Groups B, C, D
o
(Tamb -25 to +40 C)
DX100/DX100 (M) UL
Termination Unit
Class I Div 1
Groups B, C, D
o
(Tamb -25 to +40 C)
-
92
SHC1 Handheld
Interrogator
Class I Div 1
Groups B, C, D
(Tamb -50 to +40 C)
IS Cable
Length 15m max.
SHC1 Handheld
Interrogator
Class I Div 1
Groups B, C, D
(Tamb -50 to +40 C)
IS Cable
Length 15m max.
Searchline Excel
o
Conduit
seal
required
within 6"
often closure
(see OEM
details
for J/B)
o
Conduit
seal
required
within 6"
often closure
(see OEM
details
for J/B)