Honeywell Searchline Excel Open-Path Technical Handbook page 108

MAN0530 Issue 09 October 03
2104M0506
APPENDIX A - HANDHELD INTERROGATOR
where:
tttttttt
Note: It is not possible to change the system type. This is set during calibration and configuration of the
unit at the factory.
Path Length
The following message is displayed:
where: The path length in metres.
nnnn
The following ranges of path length can be entered for the system types:
System Type
Short Range
Medium Range
Long Range
Duct Mount
Self Test
This starts the system self test process.
The following message is displayed:
This message is displayed during the self test process after pressing Enter.
This message is displayed for three seconds at the end of a successful self test process.
System type. The system type displayed is one of the following:
Display Text
Short Range
Medium Range
Long Range
Duct Mount
Path Length
Minimum Range (m)
5
20
20
0.5
Press Enter to
Perform checks
Processing Data
Please Wait
Checks Passed
System Type
40m range system
120m range system
200m range system
0.5 - 5m range system
nnnn
Maximum Range (m)
40
120
200
5
108
Searchline Excel
Step Size (m)
1
1
1
0.1