Honeywell Searchline Excel Open-Path Technical Handbook page 31

MAN0530 Issue 09 October 03
2104M0506
3. INSTALLATION AND OPERATION
(4) Fit an adjustment clamp to the unit s pivot block mounting stud so that it sits on the
stud s shoulder. The correct orientation for the pivot blocks and clamps is as follows:
(5) Tighten the adjustment clamp's grubscrews until they just grip the unthreaded part of the
stud.
(6) Fit the pivot block to the mounting bracket using a self-locking clamp nut and washer
(M12 or M20). The correct orientation for the pivot blocks and mounting brackets is as
follows:
Do not fully tighten the nut.
Mounting Plate Fixed to Twin Pipes/Poles
Mounting stud
Adjustment clamp
Self-locking clamp
nut and washer
2.5in. U-bolt - 4-off
(not supplied) using
A holes
Pivot block
Mounting
bracket
Mounting bracket
grubscrew
31
Searchline Excel