Honeywell Searchline Excel Open-Path Technical Handbook page 62

MAN0530 Issue 09 October 03
2104M0506
4.4.1 Mechanical Installation
Verify that the equipment to be installed is correct for the type of installation required (i.e. short/
long range and normal/high temperature.)
Identify the mounting holes using the following drawing and table:
Identity
A
B
C
D
E
F
G
H
4. CROSS-DUCT EXCEL
Quantity Size
4 M6 tapped
8 6.5mm
2 14mm
1 10mm
1 25mm
3 M6 tapped
4 M6 tapped
2 M10 tapped
Used for
Mounting cell mounting
Mounting plate to support bar mounting
Clearance for support bar fixing nuts
Drain for mounting cell
Cross-Duct optical measurement path
DVC100 mounting
BARTEC terminal box fixing
DX100/DX100 (M) fixing
62
Searchline Excel