Honeywell Searchline Excel Open-Path Technical Handbook page 41

MAN0530 Issue 09 October 03
2104M0506
3. INSTALLATION AND OPERATION
Use a viewing position that ensures that the full circular view is in sight. An ellipse will
appear when slightly off axis.
Caution: Do not try to adjust the cross-hairs using the telescope's elevation and windage
adjusters as they have been factory set.
Clamp nuts
Adjustment clamp
(6) Iteratively tighten and loosen each pair of adjustment screws sequentially in the
horizontal and vertical directions until the setting is correct.
Off-axis view
Adjustment clamp
lock screw (2 off)
Pivot block
adjusting screw
(2 off)
lock screw
(2 off)
Mounting bracket
adjusting screw (2 off)
41
Searchline Excel
Clamp nuts
Mounting bracket
adjusting screw (2 off)
Adjustment clamp
lock screw (2 off)
Pivot block
adjusting screw
(2 off)