Honeywell CK75 Repair Manual page 30

TITLE
CK75 Repair Manual
4
2.
Position the boot in the magnesium frame. Make sure it is oriented correctly with the cutout for the touch panel flex located
down by the keyboard PCB.
3.
Position the touch panel as shown and connect the touch panel flex cable.
Cutout in boot for
touch panel flex
cable
4.
Flip the touch panel over so it is now located above the keyboard PCB assembly.
5.
Connect the LCD flex cable to the main logic board and then position the LCD panel down into the boot.
Model DOCUMENT NO.
CK75
L3-GLBL-RPR-4254
Use boot as a guide to
install new grounding
pads as needed
Connect touch
panel flex cable
PAGE
Page 30 of 42
(Rev A)