Vibrator Motor - Honeywell CK75 Repair Manual

TITLE
CK75 Repair Manual
OPERATION:

Vibrator Motor

The vibrator motor is friction fit into the bottom housing assembly. A cable then connects it to the keyboard PCB assembly.
Tools Required
Description
Tweezers
Parts Required
Item Part Number
1 8754-870903-05
Removal
1.
Remove the bottom housing assembly (refer to Bottom Housing operation).
2.
Pull the vibrator motor out of its slot in the bottom housing. A piece of kapton tape is used to hold the cable away from
the uSD/SIM card door opening in the bottom housing.
Installation
Installation is reverse order of removal.
1.
Press the vibrator motor into its slot in the bottom housing.
2.
Route the cable around away from the uSD/SIM door opening and re-install the kapton tape.
3.
Re-install the bottom housing assembly.
OPERATION:
Super Capacitor
The backup power super capacitor is secured inside the bottom housing with a bracket and two screws.
Tools Required
Description
#0 Phillips Screwdriver
Description
Vibrator,3V,70mA,w/Wire,CK75
Model DOCUMENT NO.
CK75
L3-GLBL-RPR-4254
Part Number
1
Part Number
PAGE
Page 19 of 42
(Rev A)
Qty
1