Advertisement

CK65
powered by Android™
Quick Start Guide
CK65-A-EN-QS-01 Rev L
12/22

Advertisement

Table of Contents
loading

Summary of Contents for Honeywell CK65LON

  • Page 1 CK65 powered by Android™ Quick Start Guide CK65-A-EN-QS-01 Rev L 12/22...
  • Page 2: Memory Card Specifications

    Memory Card Specifications Honeywell recommends the use of Single Level Cell (SLC) industrial grade microSD™ or microSDHC™ memory cards with mobile computers for maximum performance and durability. Contact a Honeywell sales representative for additional...
  • Page 3 Mobile Computer Features All Imagers Imager (LED / Laser Aperture) Ambient Light Sensor Touch Panel Notification/Scan/ Battery Status LEDs Scan Buttons Power Button Keyboard (model dependent) Microphone Keypad Status LEDs...
  • Page 4 CK65 Model with S0803-LR/S0703-SR/N6803-FR/N6703-SR Imager Laser Safety Camera Lens Label Location and Flash (optional) Hand Strap Speaker Speaker Port Port Scan/Aux Button Scan/Aux Button All CK65 Units Battery Latch (under hand strap) I/O Connector MicroSD Card Door (battery and hand strap removed)
  • Page 5 CK65 Model with EX20 Imager Laser Safety Camera Lens Label Location and Flash (optional) Hand Strap Speaker Speaker Port Port Scan/Aux Button Scan/Aux Button All CK65 Units Battery Latch (under hand strap) I/O Connector MicroSD Card Door (battery and hand strap removed)
  • Page 6 Install a microSD Card (Optional) Always power off the computer before attempting to install or remove a card. Install the Battery for hand strap release information. Format the microSD card before initial use.
  • Page 7: Install The Battery

    Install the Battery The standard CK65 mobile computer ships with a Li-ion 3.6 VDC, 25.2 watt-hour battery manufactured for Honeywell International Inc. The cold storage CK65 mobile computer ships with a Li-ion 3.6 VDC, 18.7 watt-hour cold storage battery. Use only Honeywell Li-ion battery pack models CK65-BTSC, AB17, AB18, 1001AB01, and CK65-BTCS (cold storage).
  • Page 8: Turn Power On/Off

    4 hours. Using the computer while charging the battery increases the time required to reach a full charge. We recommend the use of Honeywell accessories and power adapters. Use of any non-Honeywell accessories or power adapters may cause damage not covered by the warranty.
  • Page 9: Battery Replacement

    Battery Replacement Hot Swap You can replace the battery on demand provided the following conditions are met: • The computer has been powered on for at least 4 minutes. • You insert a new battery within 30 seconds. Swap Battery Mode Swap Battery mode places the computer in a low power state so that the battery can be removed for a short time.
  • Page 10 Adjust the Display Sleep Time To adjust the amount of time before the display sleeps after inactivity: Swipe up from the bottom of the Home screen to access all apps. Touch Settings > Display > Screen timeout. Select the amount of time before the display goes to sleep. Touch to return to the Home screen.
  • Page 11: About The Home Screen

    About the Home Screen Notification / Status Bar Search Bar Home Screen Panel Favorites Tray Navigation Buttons...
  • Page 12: Navigation And Function Buttons

    Navigation and Function Buttons For button locations, see Mobile Computer Features. Button Description Back Return to the previous screen. Home Return to the Home screen. Recent Apps View and switch between recently used apps. Scan Press the right, left or front scan button to trigger the scanner.
  • Page 13 About Provisioning Mode After completing the out-of-box set up process, Provisioning mode is automatically turned off. Scanning a barcode to install applications, certificates, configuration files, and licenses on the computer is restricted unless you enable Provisioning mode in the Settings app. To learn more, see the user guide. Scan a Barcode with the Scan Demo Note: For optimum performance, avoid reflections by scanning the barcode at a slight angle.
  • Page 14 Note: In the Scan Demo app, not all barcode symbologies are enabled by default. If a barcode does not scan, the correct symbology may not be enabled. To learn how to modify the default app settings, see the user guide. Sync Data To move files between your CK65 and a computer: Connect the CK65 to your computer using a USB charge/...
  • Page 15 Note: To learn about advanced reset options, see the user guide. Support To search our knowledge base for a solution or log into the Technical Support Portal and report a problem, go to sps.honeywell.com and click Support. Documentation Product documentation is available at sps.honeywell.com.
  • Page 16: Limited Warranty

    Google, Android, Google Play and other marks are trademarks of Google LLC. Disclaimer Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes have been made.

This manual is also suitable for:

Ck65

Table of Contents