Honeywell CK75 Repair Manual page 22

TITLE
CK75 Repair Manual
Parts Required
Item Part Number
1 8754-870900-41
1 8754-870900-43
Removal
1.
Remove the bottom housing assembly (refer to Bottom Housing operation).
2.
Disconnect the scan switch/speaker harness from the main logic board.
3.
Using a T7 torx driver remove 4 screws that secure the scan bracket to the core assembly.
Scan switch/speaker
harness connector
4.
Gently lift the scan bracket away from the core assembly and disconnect the antenna coax from J4 on the main logic
board.
5.
Disconnect the scan engine and camera flex cables from the main logic board.
The scan bracket assembly can now be serviced itself or set aside to be re-installed later. If the base scan bracket assembly
is being replaced you will remove the WAN/WiFi antenna, EA30 scan engine, camera, and side scan PCB's and transfer
them to the replacement base scan bracket assembly. See the EA30 Scan Engine, WAN/WiFi Antenna, Camera, and Side
Scan PCB operations elsewhere in this guide for tool, parts, & procedures related specifically to those items.
Description
BRACKET,MOUNTING ASM,EX25,CK75
BRACKET,MOUNTING ASM,N5603,CK75
802.11 antenna coax
connector at J4
Model DOCUMENT NO.
CK75
L3-GLBL-RPR-4254
1
Camera flex
cable
connection
PAGE
Page 22 of 42
(Rev A)
Qty
1
1
Scanner
flex cable
connection